关于
全部信用评价 (415)
-
***** - 买家留下的信用评价。超过 1 年购买已获认证Thank you for an easy, pleasant transaction. Excellent buyer. A++++++
-
timber-creek (7130) - 买家留下的信用评价。超过 1 年购买已获认证Just how an Ebay transaction is suppose to take place! Thank you.
-
axaproducts (3453) - 买家留下的信用评价。超过 1 年购买已获认证Thank you for an easy, pleasant transaction. Excellent buyer. A++++++.
-
genuinepartsplanet (30092) - 买家留下的信用评价。超过 1 年购买已获认证Good buyer, prompt payment, valued customer, highly recommended.
-
leric_great_hunter - 买家留下的信用评价。超过 1 年购买已获认证Good buyer, prompt payment, valued customer, highly recommended.
-
silicon_electronics_parts (462120) - 买家留下的信用评价。超过 1 年购买已获认证Please let us know if there is anything else we can do for you! Thank you!
评价
(15)
2018 年 01 月 15 日
Initial impressions are excellent
I've only used the iron on one project, but I did experiment with a couple of the temperature settings to find the one that worked best for that application. I had a good idea what it would be and I was right, but I was working on a circuit board and didn't want to use any more heat than necessary. It was nice to be able to dial that in. The FX600 made the job a snap.
2017 年 07 月 31 日
Excellent So Far
1997 Mazda Miata... Replaced a nearly new set of Uniroyal Tiger Paws that were harsh and noisy with these. Very happy with these tires so far... Much, much quieter and smoother rolling. And grip has been improved dramatically (of course went from a T-rated tire to these V-rated Kumhos). Two caveats: (1)The Miata is very small and light and doesn't get driven very much so can't speak to wear characteristic. (2)And, b/c my speedo was nearly 4 mph off, I replaced the stock rims with Enkei racing rims as well, so ended up going about 2 sizes bigger with the Solus tires (1 rim size + 1 tire size: 185/60R14 to 195/60R15). This new wheel/tire combo is great, but the larger tires have probably also contributed to the overall increase in performance...
2016 年 09 月 22 日
Unnecessary
在 1 位用户中，有 1 位用户认为此评价有帮助
When I removed the old oil pan (the drain hole was stripped) I noticed it had no gasket, only gasket-making product. I used the gasket anyway. It fit fine and stayed in place well using the supplied gasket adhesive, but it started to leak after the engine had run for a few minutes. The gasket, which I probably over-tightened, had blown out in a couple of spots. The second time around I used Permatex Ultra Black only, following their directions and it sealed up perfectly.